Sorten-icon Variety finder



Show varieties

Varieties Soya Bean




Recommendations for soybean growing

Climate:

Soybean has a strong need for water and high temperature. Rule of thumb: soybean of maturity group 000 can be grown in regions where grain maize with FAO > 240 grows. Varieties of maturity 00 in regions where grain maize FAO > 260 is grown. Avoid locations with late frosts and cold climate.

 


Soil conditions and locations:

Ideal are lighter soils with faster warming in spring and with sufficient water supply.
Soils with a lot of stones are not suitable, as the harvester/combine hast o cut as low as possible.
Locations with a high weed pressure should be avoided.
Soybean is very attractive to doves, crows, rabbits and deer.


Pre-crop/crop rotation:

The pre-crop should suppress thermopphilous late germinating weeds, winter cereals are preferable to spring weeds.
Soybean is in general affected by Sclerotinia, therefore a 4 year separation to sunflower, oilseed rape and tobacco is mandatory.
Soybean is partly self- compatible. As long as there are no crop rotation based disease it can be grown after soybean to make use of the Rhizobium bactera in the soil.


Planting date:

Mid to end of April, latest beginning of May. Soil tempterature must be above 10°C. Late sowing can lead to a harvest in late October.
Too early sowing followed by cold and moist conditions will lead to a significant decrease of emergent plants.


Fertilizer:

Basic fertilizer application of Phosphor, Potassium and Magnesium according to nutrient removal by the pre-crop (with 30 dt/ha yield: 48 kg/ha P205, 51 kg K20, 15 kg MgO). Reduced or additinal amounts should be handled with regard to different soil types No nitrogen fertilizer in the beginnig to  increase the number of Rhizobium nodules


Seed inoculation / N- supply:

Nodule forming bacteria (Bradyrhizobium japonicum) supply the plants with nitrogen fixated from the air. If soybean has never been brown on the respective feild they are not present and have to be applied to the seed.
This inoculation should take place right before sowing, because the bacteria are very sensible to heat and sunlight. The instructions given by the supplier oft he Inoculant shold be followed. Please make sure to not damage the seed in the inoculation process (e.g. mechanical damage).
If soybean has been grown for several years in the respective field, pre-inoculated seed can be sufficient to form enough nodules for nitrogen fixation.
Recommended Inoculants are: based on turf with additional adhesive
"NPPL Force 48“ (BASF) and as a powder (without additional adhesive) “HISTICK Soy“ (BASF) and "Biodoz Soja“(De Sangosse). There is a new liquid Inoculant with adhesive: „Rizoliq TOP S“ (De Sangosse).
N-Fertilizer is counter-productive as it reduces the amount of nodules. It cannot replace succesfull nodule formation and only makes sense if there ano nodules visible until flowering.

Important for seed inculation:
Keep inoculant away from light, store it dry and not above 25°C.
Do not use chlorinated water.
Prepare the seed inoculation in the shadow, the start sowing directly afterwards.
Do not let the sowing machine stand in the sun and get to warm.
Clean the sowing machine before to remoce all rest of seed treatment from previous sowings. They could harm the bacteria.

Recommendation: grow soybean in mixtures for greening to start the soil inoculation.

Control of nodule formation in mid-June: if no or too few nodules can be found and if the plants look yellow, the nitrogen can be apllied in 1or 2 doses (60 - 100 kg N/ha).


Sowing density:

55-60 germinating kernels/m² with 00-varieties, 65-70 germinating kernels /m² with 000-varieties

Sowing in (kg/ha): amount of plants/m2 x TKW in g / germination rate (%)
ca. 100 kg/ha at 60 kernels/ m² with TKW 150 g and germination rate of 90 %
ca. 200 kg/ha at 70 kernels/ m² with TKG 243 g and germination rate of  85 %
If intensive mechanical weed control is done add 10-20%
A germination test is recommended in any case.


Sowing depth:

2 cm in heavy or colder soils, 3 - 4 cm in lighter soils. 5 cm if soil herbicides are used, drought conditions or heavy bird damage.


Sowing technology:

Ideal is a pneumatic single seed sowing machine (saves seed costs and does not damage the kernels). Normal drill technolopgy is also approved

Drive slowly during planting (max. 6 km/h) to avoid empty spots.

Row distance 12,5 - 35 cm, with mechanical weed control 40-50 cm.


Weed control:

Succesfull weed control is the key for good soybean production. Due to relativ slow juvenile deleopment as compared to other crops. Soybean tends to heavy weed problems espcially under colder conditions.

Convulvulus and Cirsium cannotbe controlled chemically in Soybean (at least with herbicides allowed in soybean in Germany).

Growing catch and cover crops as well as soil prepartion can reduce the weed pressure considerably. Avoid too early planting!

Mechanical weed control: Harrowing is possible. Howing should be done before Harrowing to keep the driving lane visible. Howing should be done 2 times during the first 4-6 weeks. Check later in the vegetation for weeds to perform another howing.

Chemical weed control: Most efficient as pre-emrgence herbicicdes 3 days after sowing.
(pay attention to moist conditions and fine seed bed):
Artist (1,5-2,0 kg/ha +. 0,2 l/ha Centium 36 CS if needed)! Spectrum
+ Centium 36 CS+Sencor Liquid (0,8 + 0,2 + 0,3 l/ha),
Spectrum +Stomp Aqua (0,8 + 1,5 l/ha): Higher risk for damage, 5 cm sowing depth!
Grasses in post-emergence after 2-leaves stage oft he weeds: Focus Ultra +
Dash E.C. (1,25 + 1,25 l/ha), Fusilade Max (0,8-1 l/ha).

Weed control post-emergence (only as support oft he pre-emergence herbicide; not enough control if only post-emergence herbicides are used):
Harmony SX (2 x 7,5 g/ha + 0,3 l/ha Trend, at 2-4 leaf stage of weeds or until BBCH 14 of the soybean, splitting with 10-14 days inbetween).


Irrigation:

Soybean is very sensible to drought conditions, especially after flowering, during pod formation until the end grain filling phase. Highest water demand during flowering (June)July/August.


Harvest:

From September until October, leaves have turned yellow and dropped tot he ground.Kernels are loose in the pods and make KLAPPERSOUND when you shake the plants. Targetd seed moisture 14 - 20 %. Order combine before it is prepared for grain maize harvest!

Keep rotation of thresher low (400 - 600 U/min) to reduce damage tot he kernels and to have a clean harvest without pod debris. Maize and pea are hard to separate from soybean and reduce the market value. Combine, transport vehicles and storage should be clean!

Storage with grain moisture below 13% possible. For longer storage moisture should be below 12% and for very long storage below 9%.

 



We use cookies on this website. By browsing this website, you agree to our use of cookies. Privacy Policy.